How to Troubleshoot The HP Printer Problems?

 

As a brand company, the customer’s expectation of HP Printer remains very high.  It is obvious as HP Printer creates good quality multifunctional printers that never ditch its customers.   At the same time, HP Printer has to face the betrayed by the customers when unfortunately any printer shows some problem and there is no one to help to fix the problem.  During such a gruesome situation either you can take the help of local technicians if you can not fix it on your own or you can take the help of the HP Printer Support Australia team’s help.

In this blog, I will give you details about some issues and their troubleshooting tips so that during some common problems it will help you to fix the issue by yourself.

Here are some possible reasons why the HP Printer is not printing. 

 

Poor or Unstable Connection

The poor or unstable connection may be one of the common reasons why HP printers stopped working all of sudden during peak hours.  Hence, make sure the Wi-Fi connection to your printer is enabled and check if the printer is connected correctly.  If this is the problem then turn on the Wi-Fi connection and reconnect it again.  This may solve the problem if your printer does not print anything. At the same time, you must ensure that your printer is properly connected to the computer.

Outdated Driver

This is also again a common problem but is a little tricky to understand the exact problem by a non-technical person.  It is often seen that when users upgrade the old computer with a new one and the printer remains the same at that time there may show a compatibility issue due to the old driver.  Hence the solution to this problem is to update the driver with the new one.  To update the driver you can visit our website www.simpleprinterguide.com.au  or can take the help of HP Printer Support Australia.

Power Supply

This is the same problem as the first problem “Poor or Unstable Connection” but it is a little different.  The previous one was related to the internet connection and this is related to the electric power supply.  Many times due to fault in the power cable the electricity cannot flow and the printer became dead.  The best solution is to change the power cable or change the electric board depend upon the fault area. 

Printing Problem

To keep the printing in good condition, using the printer on a regular basis is the most successful and standard procedure.  This helps in preventing the blockage in the ink nozzle due to the regular flow of ink.  In case you do not use your printer on a regular basis and it shows a problem with printing then do the following checks.

• Inspect the ink cartridge.
• Check the print head of your printer.
• Check the printer driver.

Printing Problem With Color Printer

One of the common problems with a color printer is the low levels of ink in the cartridge. If the cartridge is less than 25% of ink, then it is most probably possible that it doesn’t print to the fullest. 

Secondly, if the cartridge is not being installed correctly in its slot then also color printer doesn’t print properly.

One of the most foolest mistakes we do is, we forget to remove the tape placed on the vent while installing a new ink cartridge.

If we keep in mind these few mistakes then troubleshooting a color printer is very easy.  

 

Conclusion

The printer is the most commonly used electronic device that used in offices.  During peak time if these printers stop working then the entire work gets disturbed.  Hence it is important to take care of your printer regularly.  To keep the printer in good working condition it is always recommended to check the printer on a regular basis and do some maintenance work if needed.  For a routine check and maintenance of your printer, you can call the HP Printer Support Australia team or can visit our website “www.simpleprinterguide.com.au”